Bristol Hercules 216 Arrives

We were aware of a 216 Hercules at the Yorkshire Air Museum and had seen it on many occasions. Via emails earlier this year we were told that they planed to get it up and running, which we offered our assistance in any way we could help, it  would of been a great sight at that museum to see the old Hercules running next to the Halifax. After a few months we had heard nothing so we decided to pop down and see the progress, to our surprise we were told that the engine was being removed from that site by the owner! We had a quick look at the condition of the engine as we were told it had been left outside for a year! We found that by looking through the exhaust stubs that the sleeves looked in good condition with no signs of corrosion even though we were told by a couple of engineers at the museum that they had looked at it and found that it was seized. We managed to obtain the owners email address and emailed him straight away to see if we could acquire the engine and get it up and running.  Well, Peter Blackburn who owned the engine and had lent it to YAM on long term loan in running order with with a full set of tools , exhaust and paper work for engine was not to pleased to say the least in how they had looked after his engine. The tools, exhaust and paper work had gone missing and they had left the engine outside! Anyway after a few emails he decided to let us buy the engine and get it up and running again.We have decided to attach a name plate in memory of his father who flew a couple of Hercules in WW2  attached to a Beaufighter in N Africa.

arival 004 arival 002

Here we are collecting the 216 from YAM

arival 006 arival 007

 

Forty five minutes later it’s back at it’s new home.

arival 010 arival 009 arival 008

 

As you see it’s all there minus the exhaust , starter and plugs.

arival 013 arival 011

 

On closer inspection the internals of the engine look in pretty good condition and covered in grease!

216_de_sieze 001 216_de_sieze 003 216_de_sieze 006 216_de_sieze 007

 

The first job we had to do was make a flange and starter dog so we could try and turn over the engine.

216_de_sieze 009 216_de_sieze 010 216_de_sieze 012 216_de_sieze 013

Just a bit more machine work for Pete!, it took a full day but it was needed.

216_de_sieze 015 216_de_sieze 016

Once installed we tried to move the engine and found that No One sleeve was the only one not trying to move.

216_de_sieze 017 216_de_sieze 025

So we removed No.1 head and cylinder and then the engine turned over with ease.

216_de_sieze 022 216_de_sieze 024

After seeing how much grease was inside the engine we decided to remove all the heads and clean the grease out.

216_cleaning 018

At this point we found out from Peter Blackburn that an engineer that worked for him called Michael Ferguson got the engine running to show Peters father which he loved here running again after so many years since his service in the RAF, then re-inhibited the engine. Sadly Michael passed away five years ago so it’s another fitting tribute to him that we get this engine running again, because if it wasn’t for his efforts this engine would of been scrap.

216_cleaning 023 216_cleaning 020

 

The heads took only a Saturday afternoon to de-grease and clean up.

Copy of 216_cleaning 010 Copy of 216_cleaning 009

 

Out with the tooth brush again and clean up cylinder one of dried up deposits and free off the cylinder rings which were in good condition.

216_cleaning 025 216_cleaning 027

 

216_cleaning 028

 

After cleaning up the cylinder, we lube it up, made a new “O” ring, applied som sealant and refitted the cylinder to the engine.Then we refitted the cylinder heads.

starter plugs

 

Brian Mills a fellow Bristol Hercules restorer helped source new spark plugs and a starter, the starter is in serviceable condition just needs cleaning up. We are very grateful to Brian for all his help in sourcing parts and advice.

Exhaust 001Exhaust_stub

 

As we planed to give the 216 a test run before the end of September, don’t no why we decided that but it’s always good to have a target date! we better sort out an exhaust system. a complete 216 Exhausts are very hard to find now so we decided to fit the front part of the 264 system and then fit exhaust stubs like fitted to the Bristol Freighter.

Exhaust 006

 

A few of the inter connecting pipes were cracked, so we tig welded them up.

Exhaust 003 Exhaust 002

 

On a couple of the swivel joints we heated them up to free them off to allow us to align them up. It’s a fiddly job but once you get into the order you have to fit them, it doesn’t to to long to fit the exhaust.

Exhaust 007 Exhaust 008 Exhaust 009 Exhaust 010

After another Saturday afternoons work, just over half of the exhaust is fitted.

1 thought on “Bristol Hercules 216 Arrives

  1. Really pleased now looking at the Hercules now its being cared for again, and sadly really tearful at the mention of my old dad and Michael who both loved the task of getting the old Warrior running, both of them would be embarrassed to see that I had let their names out, but I thought the world of both of them for different reasons, Dad for letting me slowly into the world he occupied in WW2 and Michael for his skill at not only getting the thing running , but ” clarting it with grease” afterwards, if he’s looking down well done Michael

Leave a Reply to Peter Blackburn Cancel reply

Your email address will not be published. Required fields are marked *